Sale ends soon!
Size:24′ X 20 YD 24′ x 20 Yard Roll Roll Application Tape for printable eco solvent Heat Transfer Vinyl Film is designed to protect printed heat transfer material from the high temperatures of heat pressing. * Designed to aid the alignment of the graphic to the garment and protect printed heat transfer material from the high temperatures of heat pressing. * After printing and cutting your graphics, weed or remove the excess material from around the printed design. NOTE: Some ink systems take a while to dry completely. While a print may feel dry to the touch, any ink may take can take an additional ten minutes to a half hour to fully outgas. If the ink does not cure completely, the masking used to transfer the applique may not stick sufficiently. Then, mask the printed graphic using 24′ x 20 Yard Roll Roll Application Tape for printable eco solvent Heat Transfer Vinyl Film.. Squeegee the masking over the top of the printed graphic to removing the large air bubbles. Many people find it easier to begin squeegeeing the masking from the center and working their way outwards. After the masking is initially secured, resqueegee the masking using a nylon squeegee with firm pressure. To ensure good pressure always work on a hard work surface. Place the masked graphic to the side and allow the adhesion to build for thirty minutes. This waiting period is important, especially with ecosolvent inks, which can take a while to cure. In most cases, you will print several appliques on the same sheet. After the printed graphic is masked, you can cut the sheet apart to separate the individual appliques. You can leave the masking on the graphic in storage until you are ready to apply the appliques to garment. After the adhesive builds to the optimal level, it will not continue to build.